H&R Coilover Suspension Twin-Tube 45851-9 for AUDI TT, A3

Description

H&R Coilover Suspension Twin-Tube 45851-9 for AUDI TT, A3
H&R Twin-Tube coilovers offer performance handling combined with superb ride comfort. Drawing from H&R's knowledge gained in international motorsport, each coilover kit is tested and calibrated by the H&R engineers to deliver the optimal performance for each application.
Progressive rate springs provide the best of both worlds - smooth ride for normal driving and a firmer rate for hard cornering. The threaded shock bodies allow finite height adjustment to suit your individual driving preferences and conditions, and let you set the height for the required stance.
Shock absorbers feature stainless steel construction for good looks and corrosion resistance
Trapezoid threaded shock body allows almost infinite height adjustment
H&R precision wound progressive coil springs
Adjustment wrenches included
Height adjustment according to type approval
Designed and manufactured in Germany
The H&R Twin-Tube coilovers feature full height adjustment up to 60mm. The body of the coilover is made of high quality stainless steel. Each H&R coilover is fitted with a built in bump stop and helper spring which ensures the main spring stays in place when the car is jacked up. The stainless steel bodies ensure excellent weather protection but bear in mind all coilovers should be kept well greased to prevent dirt build up between the coilover threads.
The H&R Twin-Tube coilover is well known all over the world for build quality and perfect road holding and balance. If you are looking for a coilover suspension kit combined with un-rivalled levels of performance at a truly superb price… H&R is the one to choose!
Height adjustable (not hardness adjustable)
Please note additional information and vehicle-specific technical notes!
"The minimum clearance between tires and suspension/body parts is 5 mm. If the clearance is less than 5 mm it has to be restored with wheel spacers or reworking thebodywork. This bodywork and/or arising costs are not covered by H&R."
Note DCC: The installation of this suspension into cars with an electronic damping adjustment (DCC Magnetic Ride etc.) must be done in an authorized (Audi - VW- etc.) workshop. The signal of the electronic damping adjustment in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
Only for FA-strut clamp ø 55 mm
Lowering beyond the dimensions given in the type approval may result in damage. These damages are not covered by H&R.
This item fits for:
Manufacturer
Model
Lowering in mm (FA/RA)
Axle load (FA/RA)
AUDI
TT (8J3)
50-70mm/40-60mm
--> 985kg/
AUDI
TT Roadster (8J9)
50-70mm/40-60mm
--> 985kg/
AUDI
A3 Limousine (8VS 8VM)
50-70mm/40-60mm
--> 985kg/
AUDI
A3 (8V1 8VK)
50-70mm/40-60mm
--> 985kg/
AUDI
A3 Sportback (8VA 8VF)
50-70mm/40-60mm
--> 985kg/
AUDI
A3 Cabriolet (8V7 8VE)
50-70mm/40-60mm
--> 985kg/