JJBP Salsa Warbird Cutthroat Firestarter 15 to 12 Fork Thru Axle Conversion Kit

Description

JJBP 15mm to 12mm Fork Thru Axle Conversion Kit for Salsa Warbird, Cutthroat, and Firestarter 15x100 thru axle disc forks. Kit includes the following:
• Thread adapter: M15x1.5mm pitch external thread, 13mm long, M12x1.5mm internal thread
• Thru Hole Insert: 15mm OD x 12mm ID, 13mm long
• Axle: 12mm x 128mm long, M12x1.5mm threads
IMPORTANT: The Thread Adapter in this kit has no flange and installs from the INSIDE of the dropout due to the convexity of the outer fork leg on the Salsa fork. The Thread Adapter comes with low-strength non-hardening threadlocker pre-applied to the threads. The fork threads must be clean and dry before screwing in the adapter from the inside of the fork leg until it is flush with the inner dropout face. Use a small coin such a penny or nickel engaged in the two notches, adding an adjustable wrench if necessary for more torque.
Please contact me with any questions about this process.
See other auction for many more sizes! Kits are available for nearly every 15mm thru axle fork ever made.
Please contact me with any questions!