PowerXchanger Xm-10 Installer Series SMART Voltage & Frequency Converter

Description

PowerXchanger Xm-10 Installer Series SMART Voltage & Frequency Converter - Convert Voltage from 220-240 Volt 50 Hz to 110-120 Volt 60 Hz - Frequency Converts from 50 Hz to 60 Hz.
The Best Quality Voltage Converter and Frequency Converter
Key Features:
The Xm-10 is the second most powerful Voltage and Frequency converter in the series. Providing 10 Amps of regenerated, clean, 120v~60 Hz power, it includes all of the same technical features of the larger capacity Xm-15. Perfect for powering multiple devices and appliances whose total load does not exceed 10 Amps.
Xm-10 is a full-featured sine wave output regenerator that produces new, clean, and constant AC power; eliminating line noise and ensuring optimum performance. It is capable of providing 120v~60 Hz electricity for running household appliances such as refrigerators, gas stoves, washers, gas dryers, microwaves, household power tools, and small appliances.
This unit is designed to be Wall Mounted remotely in a convenient location and utilizing the supplied Input Receptacle wired to the two supplied Double Outlets at the points of use.
The Xm-10 features a hardened metal casing.
Power
With sophisticated electronics, including power factor correction, as well as input and output EMI and RFI filters, it produces continuous power at over 92% efficiency and with output Harmonic distortion below 3%. High levels of regulation ensure 120v~60 Hz output with fluctuations below ± 2%, making it the ideal conversion device for taking high-end audio and home theater equipment overseas.
Power for High Performance Audio
To the audiophile, the Xm-10 functions as a Regenerator with Power Factor Correction (PFC). It is a premiere choice for powering audio equipment to satisfy the most demanding audiophiles. With its clean sinewave output (typically < 1%THD) and with virtually no change in amplitude due to input voltage fluctuations and output load transients, audio equipment will always function with optimal performance. Because the output of the Xm-10 regulates so well, another advantage to the audiophile is that other equipment powered by the Xm-10, such as HDTVs and DVRs, will not introduce noise or distortion to the audio output via the common power connection.
Additionally excellent EMI filtering on the input and output of the Xm-10 prevents RFI noise from being injected into the audio output.
Another important feature for audiophiles is the high output surge current capacity (150 Amps) of the Xm-10. This capability to source high surge currents with minimal distortion of the output voltage results with crisp high volume audio transients.
Frequently overlooked is the importance of PFC for noise free operation of audio equipment. Because PFC eliminates voltage and current distortions on the input power leads to the Xm-10, this potential source of audio noise is virtually non-existent.
Reliability
The Xm-10 has sealed, solid-state electronics that protect against humidity and dust, ensuring reliability and a long product life. An External Fan automatically cools the sealed electronics whenever the load exceeds 10 Amps or when environmental factors exceed operating temperature.
Safety
Not only will electrical equipment perform better, but the Xm-10 also acts as an advanced voltage regulator, which fully protects equipment against voltage irregularities, such as under INPUT voltage as low as 180Vac and over voltage as high as 265Vac and provides an appliance with inrush surge protection of up to 150 Amps.
Audible alarms notify overload, short circuit and temperature.
The Xm-10 not only meets the stringent standards of the UL and FCC in the USA, but also meets International Safety Standards.
Features
Frequency Converter
Voltage Converter
Sophisticated Voltage Regulator
Surge Protection
Short Circuit Protection
Over-Current Protection
Power Factor Correction (PFC)
Thermal Protection
Lightweight
High Efficiency
Input EMI and RFI Filters
Output EMI and RFI Filters
Low Harmonic Distortion
Sealed, Solid State Electronics
External Cooling Fan
Continuous Power
Audible Alarms
International Approvals
Includes Remote Installation Kit
Output
Output Voltage
120Vac
Output Current-Amps @ 60Hz
10A
Voltage Regulation
± 2% From Setpoint
Output Frequency
60Hz (Auto-Synchronized to Mains)
Crest Factor
4:1
Voltage Waveform
Sine Wave
Output Distortion (Resistive Load)
<2%
Output Distortion (Reactive Load)
<3%
Non-Linear Peak Current for 30 sec.
40A
Standby Power
10W
Total Harmonic Distortion
< 3% at 100% Linear Load
Output EMI Filter
150Khz - 30Mhz
Output RFI Filter
30Mhz - 1000Mhz
Clamp Level
190V
Protection
Over Current Protection
Over Load Alarm Level: 100% ~ 135%
(alarm after 1 minute delay, shutdown after 1 minute alarm)
Over Load Shutdown Level: 136%
(shutdown after 2 second delay)
Short Circuit
Pulsating Type, 40A Peak
Auto-Restart time: 30 seconds
Input
Nominal Voltage
200V/220V/230V/240V
Maximum Continuous Load
1200W
Maximum Peak Load
2000W
Input Frequency
46Hz ̴ 65Hz
Phase
Single
Noise Filtering
Full-Time EMI/RFI Filtering
Input EMI Filter
150Khz -30Mhz
Input RFI Filter
30Mhz - 1000Mhz
Over Current Protection
By Re-Settable
Over Current Protector
Voltage Range
180Vac ̴ 265Vac
Power Factor
> 0.95
Audible Alarm
Over Load Alarm:
Continuous alarm
Short-Circuit Alarm:
1 beep every 2 seconds
Thermo Alarm:
Every other 2 seconds, 32 beeps in 2 seconds
Inrush Surge Capacity
<150A
Voltage Interruption Ride Through
30mS
Efficiency
>92%
Indicators
LCD
Not Applicable
LED
Not Applicable
Environmental and Safety
Operating Temperature
Up to 2000 Meters:
0° to 45°C
(32°F to 113°F)
Transit/Storage Temp
-15°C to 60°C
(5°F to 140°F)
Relative Humidity
5 – 95% Non-Condensing
Operating Altitude
0 ~ 3000 Meters
Moisture Sensitivity
Sealed Electronics
Cooling
Natural Ventilation
Yes
External Cooling Fan Control
Auto on/off, controlled by heat sink temperature & load level
Physical
Product Dimensions
L×W×H(cm/in)
41.50 × 26.50 × 12.50 cm
16.34 × 10.43 × 4.92 in
Net Product Weight
Net/Gross (kgs/lbs)
11.30 kgs
24.91 lbs
Carton Dimensions
L×W×H(cm/in)
58.00 x 30.00 x 54.00 cm
22.83 x 11.81 x 21.26 in
Shipping Weight
18.14 kgs
39.99 lbs
Warranty
2 Years, Full Replacement
Quality Control Standard
ISO9001
International Approvals
UL-ULus (CCN: QQFU/7) Power Units Other Than Class 2,
UL 1012, Seven Edition, October 14, 2008
UL-cUL: CAN/CSA-C22.2 No. 107.1-01, September, 2001
DEMKO-CB IEC60950-1:2005+A1:2009+A2:2013 (Ed. 2.2)
TUV/SUD-CB IEC 60335-1:2010+A1:2013 (Ed. 5.1)
FCC Part 15: subpart B
EMC 2004/108/EC