Starter For Jeep Commander 2006-2010/Grand Cherokee 2005-2010 3.7L KAC 17939N

Description

Specification:
√ Brand new and Hight quality √ All of our starters are tested to ensure product performance and durability   Feature:
√ Brand: KAC √ Voltage: 12 √ KW: 1.2 √ Condition: New √ Rotation: CW √ Note: PMGR √ Teeth: 10  Application:
1.Part Number：17939 M0T31471 SMT0301 56044734AA 17460 M0T31471
2.Fitment:
For JEEP COMMANDER 3.7L 2006-10
For JEEP GRAND CHEROKEE 3.7L 2005-10
Package Includes:
1 x Starter
Vehicleparts-world
Starter For Jeep Commander 2006-2010/Grand Cherokee 2005-2010 3.7L KAC 17939N
Specification:
√ Brand new and Hight quality
√ All of our starters are tested to ensure product performance and durability
Feature:
√ Brand: KAC
√ Voltage: 12
√ KW: 1.2
√ Condition: New
√ Rotation: CW
√ Note: PMGR
√ Teeth: 10
Application:
1.Part Number：
17939 M0T31471 SMT0301 56044734AA 17460 M0T31471
2.Fitment:
For JEEP COMMANDER 3.7L 2006-10
For JEEP GRAND CHEROKEE 3.7L 2005-10
Package Includes:
1 x Starter
Fault check:
The starter often has failures and phenomena that cannot rotate or rotate slowly. In this case, check the following aspects:
1. The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.
2. The starter thread is loose or off, and the switch or adsorption switch fails.
3. The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.
4. Excitation coil or armature coil is short-circuited or disconnected.
5. The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.Organization maintenance
In the process of starting the engine, the starter must draw in 344~400Ah from the battery. Therefore, in order to prevent the battery from over-current or damage, the starting time should not exceed
5s. In winter, it is easy to start difficult to start. Multiple starting times should not be too long, and appropriate intervals should be left in each starting.
How to Install a Car Starter:
There’s never a convenient time for your vehicle’s starter to fail. A car starter's job is to kick over the engine in your car so your vehicle starts.When you find yourself with a vehicle that won’t start, there are a number of a number of issues that may be the culprit,but once you’ve narrowed it down to a faulty starter, you can replace it using just common hand tools.
Part 1: Removing a Bad Starter
(1).Disconnect the battery.
You will not need to remove the positive cable on the battery.
Always disconnect the battery before servicing the electrical system in your vehicle.
(2).Jack up the vehicle if need be.
Ensure you jack the vehicle up on firm, level ground.
(3).Locate the starter.
The smaller cylinder attached to the starter is the starter solenoid.
A wire should run directly from the positive terminal on the battery or from the fuse box under the hood to the top terminal on the starter solenoid.
(4).Disconnect the wiring to the solenoid.
In some cases, it may just be clips you need to disconnect for the wiring.
On some starters, you will need to loosen bolts or screws that hold the wires in place.
(5).Remove the starter retaining bolts then the starter.
Be sure to use the correct size socket, otherwise you risk damaging the bolts.
(6).Compare the new starter to the old one.  Slide the starter into place.
If the two starters don’t look mostly identical, it may not be the correct starter for your vehicle.
New starter solenoids often come with four terminals, but can be used with only two.
Part 2: Installing a New Starter
(7).Insert the starter retainer bolts.
If the bolt does not thread properly, unscrew it and try again.
Make sure the bolts are tight so they can’t vibrate loose while the engine is running.
(8).Connect the wiring to the starter solenoid.
With the starter secured in place, reconnect the wiring you disconnected from the old starter onto the terminals on the new one. If your new solenoid has four terminals but your old one had two, only utilize the top and bottom terminal on the new solenoid. If your old one had four and the new one does as well, connect them to the same terminals they were connected to on the old one.
(9).Reconnect the battery.
With the starter installed and wired, reconnect the black cable to the negative terminal on the battery and tighten it in place. Insert the key into the ignition and attempt to start the vehicle.
If the vehicle fails to start with the new starter in place, ensure the battery is fully charged.
(10).Listen to the vehicle as you attempt to start it.
As you turn the key in the ignition, listen for the sounds the engine makes to help determine if you have an issue with your starter. If the engine makes no sound whatsoever, or you hear only a faint clicking, it may be because there isn’t enough power reaching the electric starter motor.
(11).Ensure the battery terminals are clean and secure.Charge your vehicle’s battery.
A weak connection from the battery can prevent the engine from starting.
Wear gloves when cleaning battery terminals to avoid getting battery acid on your skin.
If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.
(12).Check to see the starter solenoid is bad.
If the test light does not light up, it means power is not reaching the starter motor due to a faulty solenoid or a dead battery.
If the test light does light up, it means the solenoid is good, but the starter itself may have failed.
Frequently Asked Questions:
(1).Why is my car starter burning out?
You likely cranked the starter for too long.
(2).I have to change the starter fairly often in my car. What could be causing this?
A leak of some sort could be fouling the starter if fluid is dripping on it. If that's the case,
replacing the starter doesn't fix the leak so it's only a matter of time before the new starter fails.
(3).What is the black wire connected to?
He black wire can be commonly associated with the wire that connects the battery to the ignition.
If this is not the wire that you are referring to then it could be a random wire that has been detached from your fuse box?
How big is this wire? If it is rather stout then that would be your battery cables. If it is a small wire then it could be several different things.
Follow it and find the origin of the wire, it could be a simple fix just take a look at it.
(4).What does a bad starter sound like?
In my case, there was very little noise when the ignition was turned, and all that was heard was a distinctive click.
One really common sign is if you see any smoke coming from the starter.
(5).If my car is grinding when I turn the key, does that mean I have a bad starter?
No. It's your flywheel. When you start your car the grinding noise would be your flywheel that's connected to the starter.
Item Specifics
UPC
988888707580
MPN
JDX707580
Manufacturer Part Number
JDX707580
Brand
KAC
Teeth
10
KW
1.2
Starter Type
PMGR
Rotation
CW
Part Type
Starter
Number of Pieces
1
Voltage
12
Type
Starter Motor
US Starter For Jeep Commander 2006-2010/Grand Cherokee 2005-2010 3.7L 17939N NEW
Type
Starter Motor
Payment
PayPal only!
⭐We only accept Paypal.
⭐Payment should be completed within 4 days after auction closed, or unpaid dispute will be filed for an closing auction. An unpaid case will be filled after 4 days.
⭐Custom duties, taxes, or charges are not included in the cost you pay to us.
⭐We send all the items are based on your paypal address.
⭐Please make sure your PayPal and eBay address is correct. If not, please correct it before payment.
Shipping
We only ship this item to United States !
⭐We ship to your eBay address. Each package will be shipped by UPS or Fedex with tracking number.
⭐Please check your shipping address carefully before checkout, it can't be changed if order completed.
⭐Ship within 1 business day once payment completed. Orders placed on weekend will be shipped within 3 days.
⭐Seriously promise: Refund or resend will be offered if item still not arrive in 7-10 business days. Just send us an email ,we will give you a satisfied solution as soon as possible.
Returns
⭐If you are not satisfied when you receive your item, please return it within 7 days for a replacement or money back. Please contact me before you return it.
⭐Defective items Must Be reported and returned to us within the warranty period. All returned items must be in the original packaging and you must tell us what the shipping tracking number, specific reason for the returnand and give us your eBay ID.
⭐We act as a responsible seller, we are willing to actively undertake the following responsibilities:
a. The item is lost during transit;
b. The item is damaged during transport;
c. Due to our work errors, transporting the wrong items to the buyer;
d. The item in the actual use of the process of quality problems.
⭐Return shipping is to be paid by the Buyer!
Contact Us
⭐
Please leave five stars positive feedback positive comment and
Five-Stars
.
Contact us if you have any question, Give us a chance to serve you, negative feedback could not solve anything,
communication Please!
(
NO
)
Three stars is LOW star, NO 1,2,3 stars PLEASE!
(
YES
)
Please give us Five-star!
⭐
Have Question or Problem??
Step 1:
Contact seller
Step 2:
Select the 1st topic:
I have a question about using my item or I want to send the seller a message
. NO others please!
⭐
Select a topic:
I have a question about using my item or I want to send the seller a message(0)(
YES
)
YES, THIS ONE!!!
We will try our best to solve online if possible, if not, will give correct return address.
I did not receive my item(2)(
NO
)
I need to return my item(1)(
NO
)
I receive an item that was not as described(1)(
NO
)
Request to cancel this order(1)(
NO
)
⭐
Step 3:
Describe your question clearly; we will give you the best solution
We will help you to track the parcel all the way and give best solution for your order, please do not open case before give us a chance for communication!
1. We have always been trying to provide the best service and reliable product for every customer, However , accident may happen sometimes please contact us solve any issue before leaving a negative feedback.
2. We have a very professional and attentive customer support team. Welcome to contact us any time and any issue will be solved by our great communications.
About Us
⭐We maintain a high standard of excellence (5 star rating) and strive for 100% customer satisfaction!
⭐Feedback is very important to us.
⭐We would like you to contact us immediately before giving us neutral or negative feedback so that we can address your concerns to our satisfaction.
⭐If we don't understand these problems, we won't be able to solve them!
⭐After understanding the problem, we will be able to give you a satisfactory answer!
Vehicleparts-world
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Starter For Jeep Commander 2006-2010/Grand Cherokee 2005-2010 3.7L KAC 17939N
Specification:
√ Brand new and Hight quality
√ All of our starters are tested to ensure product performance and durability
Feature:
√ Brand: KAC
√ Voltage: 12
√ KW: 1.2
√ Condition: New
√ Rotation: CW
√ Note: PMGR
√ Teeth: 10
Application:
1.Part Number：
17939 M0T31471 SMT0301 56044734AA 17460 M0T31471
2.Fitment:
For JEEP COMMANDER 3.7L 2006-10
For JEEP GRAND CHEROKEE 3.7L 2005-10
Package Includes:
1 x Starter
Fault check:
The starter often has failures and phenomena that cannot rotate or rotate slowly. In this case, check the following aspects:
1. The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.
2. The starter thread is loose or off, and the switch or adsorption switch fails.
3. The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.
4. Excitation coil or armature coil is short-circuited or disconnected.
5. The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.Organization maintenance
In the process of starting the engine, the starter must draw in 344~400Ah from the battery. Therefore, in order to prevent the battery from over-current or damage, the starting time should not exceed
5s. In winter, it is easy to start difficult to start. Multiple starting times should not be too long, and appropriate intervals should be left in each starting.
How to Install a Car Starter:
There’s never a convenient time for your vehicle’s starter to fail. A car starter's job is to kick over the engine in your car so your vehicle starts.When you find yourself with a vehicle that won’t start, there are a number of a number of issues that may be the culprit,but once you’ve narrowed it down to a faulty starter, you can replace it using just common hand tools.
Part 1: Removing a Bad Starter
(1).Disconnect the battery.
You will not need to remove the positive cable on the battery.
Always disconnect the battery before servicing the electrical system in your vehicle.
(2).Jack up the vehicle if need be.
Ensure you jack the vehicle up on firm, level ground.
(3).Locate the starter.
The smaller cylinder attached to the starter is the starter solenoid.
A wire should run directly from the positive terminal on the battery or from the fuse box under the hood to the top terminal on the starter solenoid.
(4).Disconnect the wiring to the solenoid.
In some cases, it may just be clips you need to disconnect for the wiring.
On some starters, you will need to loosen bolts or screws that hold the wires in place.
(5).Remove the starter retaining bolts then the starter.
Be sure to use the correct size socket, otherwise you risk damaging the bolts.
(6).Compare the new starter to the old one.  Slide the starter into place.
If the two starters don’t look mostly identical, it may not be the correct starter for your vehicle.
New starter solenoids often come with four terminals, but can be used with only two.
Part 2: Installing a New Starter
(7).Insert the starter retainer bolts.
If the bolt does not thread properly, unscrew it and try again.
Make sure the bolts are tight so they can’t vibrate loose while the engine is running.
(8).Connect the wiring to the starter solenoid.
With the starter secured in place, reconnect the wiring you disconnected from the old starter onto the terminals on the new one. If your new solenoid has four terminals but your old one had two, only utilize the top and bottom terminal on the new solenoid. If your old one had four and the new one does as well, connect them to the same terminals they were connected to on the old one.
(9).Reconnect the battery.
With the starter installed and wired, reconnect the black cable to the negative terminal on the battery and tighten it in place. Insert the key into the ignition and attempt to start the vehicle.
If the vehicle fails to start with the new starter in place, ensure the battery is fully charged.
(10).Listen to the vehicle as you attempt to start it.
As you turn the key in the ignition, listen for the sounds the engine makes to help determine if you have an issue with your starter. If the engine makes no sound whatsoever, or you hear only a faint clicking, it may be because there isn’t enough power reaching the electric starter motor.
(11).Ensure the battery terminals are clean and secure.Charge your vehicle’s battery.
A weak connection from the battery can prevent the engine from starting.
Wear gloves when cleaning battery terminals to avoid getting battery acid on your skin.
If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.
(12).Check to see the starter solenoid is bad.
If the test light does not light up, it means power is not reaching the starter motor due to a faulty solenoid or a dead battery.
If the test light does light up, it means the solenoid is good, but the starter itself may have failed.
Frequently Asked Questions:
(1).Why is my car starter burning out?
You likely cranked the starter for too long.
(2).I have to change the starter fairly often in my car. What could be causing this?
A leak of some sort could be fouling the starter if fluid is dripping on it. If that's the case,
replacing the starter doesn't fix the leak so it's only a matter of time before the new starter fails.
(3).What is the black wire connected to?
He black wire can be commonly associated with the wire that connects the battery to the ignition.
If this is not the wire that you are referring to then it could be a random wire that has been detached from your fuse box?
How big is this wire? If it is rather stout then that would be your battery cables. If it is a small wire then it could be several different things.
Follow it and find the origin of the wire, it could be a simple fix just take a look at it.
(4).What does a bad starter sound like?
In my case, there was very little noise when the ignition was turned, and all that was heard was a distinctive click.
One really common sign is if you see any smoke coming from the starter.
(5).If my car is grinding when I turn the key, does that mean I have a bad starter?
No. It's your flywheel. When you start your car the grinding noise would be your flywheel that's connected to the starter.
Item Specifics
UPC :
988888707580
MPN :
JDX707580
Manufacturer Part Number :
JDX707580
Brand :
KAC
Teeth :
10
KW :
1.2
Starter Type :
PMGR
Rotation :
CW
Part Type :
Starter
Number of Pieces :
1
Voltage :
12
Type :
Starter Motor
:
US Starter For Jeep Commander 2006-2010/Grand Cherokee 2005-2010 3.7L 17939N NEW
Type :
Starter Motor
Payment
PayPal only!
⭐We only accept Paypal.
⭐Payment should be completed within 4 days after auction closed, or unpaid dispute will be filed for an closing auction. An unpaid case will be filled after 4 days.
⭐Custom duties, taxes, or charges are not included in the cost you pay to us.
⭐We send all the items are based on your paypal address.
⭐Please make sure your PayPal and eBay address is correct. If not, please correct it before payment.
Shipping
We only ship this item to United States !
⭐We ship to your eBay address. Each package will be shipped by UPS or Fedex with tracking number.
⭐Please check your shipping address carefully before checkout, it can't be changed if order completed.
⭐Ship within 1 business day once payment completed. Orders placed on weekend will be shipped within 3 days.
⭐Seriously promise: Refund or resend will be offered if item still not arrive in 7-10 business days. Just send us an email ,we will give you a satisfied solution as soon as possible.
Returns
⭐If you are not satisfied when you receive your item, please return it within 7 days for a replacement or money back. Please contact me before you return it.
⭐Defective items Must Be reported and returned to us within the warranty period. All returned items must be in the original packaging and you must tell us what the shipping tracking number, specific reason for the returnand and give us your eBay ID.
⭐We act as a responsible seller, we are willing to actively undertake the following responsibilities:
a. The item is lost during transit;
b. The item is damaged during transport;
c. Due to our work errors, transporting the wrong items to the buyer;
d. The item in the actual use of the process of quality problems.
⭐Return shipping is to be paid by the Buyer!
Contact Us
⭐
Please leave five stars positive feedback positive comment and
Five-Stars
.
Contact us if you have any question, Give us a chance to serve you, negative feedback could not solve anything,
communication Please!
(
NO
)
Three stars is LOW star, NO 1,2,3 stars PLEASE!
(
YES
)
Please give us Five-star!
⭐
Have Question or Problem??
Step 1:
Contact seller
Step 2:
Select the 1st topic:
I have a question about using my item or I want to send the seller a message
. NO others please!
⭐
Select a topic:
I have a question about using my item or I want to send the seller a message(0)(
YES
)
YES, THIS ONE!!!
We will try our best to solve online if possible, if not, will give correct return address.
I did not receive my item(2)(
NO
)
I need to return my item(1)(
NO
)
I receive an item that was not as described(1)(
NO
)
Request to cancel this order(1)(
NO
)
⭐
Step 3:
Describe your question clearly; we will give you the best solution
We will help you to track the parcel all the way and give best solution for your order, please do not open case before give us a chance for communication!
1. We have always been trying to provide the best service and reliable product for every customer, However , accident may happen sometimes please contact us solve any issue before leaving a negative feedback.
2. We have a very professional and attentive customer support team. Welcome to contact us any time and any issue will be solved by our great communications.
About Us
⭐We maintain a high standard of excellence (5 star rating) and strive for 100% customer satisfaction!
⭐Feedback is very important to us.
⭐We would like you to contact us immediately before giving us neutral or negative feedback so that we can address your concerns to our satisfaction.
⭐If we don't understand these problems, we won't be able to solve them!
⭐After understanding the problem, we will be able to give you a satisfactory answer!
All rights reserved.